perkins engine block, engine block heater, dart engine block, short block engine

perkins engines,   perkins,  perkins spare parts,   perkins  alternators,   perkins diesel engine parts,   perkins engine parts,   perkins power wheels parts,   perkins solenoids,   perkins actuators,   perkins starter motors,    perkins oil filters,   perkins diesel, filters,    perkins engine block,   perkins radiators,   perkins  water pumps,   perkins air filters,   perkins gaskets,    perkins oil seals,   perkins rubber hoses,   perkins exhaust manifold,   perkins 100 series,   perkins 400 series,    perkins 800 series,   perkins 1000 series,   perkins 1100 series,    perkins 1300 series,    perkins 2300 series,     perkins 2800 series,    perkins 4000 series,    index,
All Makes - Engine Block Parts
[ Return ] 


(Ford) Crankshaft - Crankshaft Kit For 9N, 2N, 8N With STD Rod And Main Bearings (Part No: 9N6303ACK) 478.14 [Enlarge Picture] 


(Ford) Rotating Valve Conversion Kit - Convert regular exhaust valves to the rotating type. For 9N, 2N, 8N - Kit contains (8) A0NN6500A adjustable tappets, (4) 8N6534B valve rotator kits, (4) 8N6505C exhaust valves, (8) EAM6518A valve locks. Does not include tappet wrenches. (Part No: 8N6546B) 156.37 [Enlarge Picture] 

(Ford) Camshaft - For NAA, 500 thru 900, 2000, & 4000. 134 & 172 CID Gas Engines (1953-1964) (Part No: C0NN6251A) 145.71 

(Ford) Cylinder Head - For NAA, 500 thru 900, 2000, & 4000. 134 & 172 CID Gas Engines (1953-1964) 1-2 diameter head bolt holes. Bushings are included. For use with 7-16 diameter head bolts. When block has 1-2 diameter head bolt threads, do not use the bushings. Does not include valves or valve parts. TSC # D3JL6049B (Part No: 0429RTP) 633.00 


(Farmall/IHC) Cub Cylinder Head - Cub Cylinder Head Fits Cub Lo-Boy, Cub (Part No: 355691R2) 156.28 [Enlarge Picture] 

(Farmall/IHC) Cub Crankshaft - Cub Crankshaft Uses standard main and rod bearings (not included). Order CRK60 for std. rod bearing set and MBK60 for std. main bearing set. Use connecting rods 251246R13. For C60 gas engine to serial number 261717 (Part No: 353743R93) 599.99 

(Farmall/IHC) Crankshaft Pulley - Crankshaft Pulley For A, B, C, Super A (Part No: 6502DC) 57.65 

(Farmall/IHC) Crankshaft Timming Gear - Crankshaft Timing Gear For A, B, C, Super A (Part No: 46870DA) 98.70 


(Farmall/IHC) Crankshaft Pulley - Crankshaft Pulley For Cub replaces part # 251269R3 (Part No: R0354) 37.32 [Enlarge Picture] 

(Massey) Crankshaft Kit - For TO30 with Z129 continental gas engine with thrust on front main. Kit includes new crankshaft, standard size rod & main bearings and thrust washers where required. (Part No: Z129CK) 895.48 

(Massey) Crankshaft Kit - For TO30 (late, with thrust on center main), TO35, 35, 135 with Z134 continental gas engine. Kit includes new crankshaft, standard size rod & main bearings and thrust washers where required. (Part No: Z134CK) 833.38 

(Farmall/IHC) Crankshaft with Gear - New crankshaft with gear, less bearings, order bearings separately for 6 cylinder D414 & DT414 Diesel engines for tractors: 966, 1066;Combines:815, 915. (Part No: 675668C92) 1033.63 

(Massey) Oil Pump Kit - Complete repair kit for TE20, TO20, TO30, TO35, 35, 135, 50, AND 150 with Continental 2 15-16 O.D. drive gear. (Part No: OPK60A) 40.43 

(Massey) Oil Pump Kit - Complete repair kit for 65, 165, 175, and 180 with Continental. 3-1-8 O.D. drive gear. Part # OPK60A (Part No: OPK65A) 39.93 


(Nseries) Crankshaft - Crankshaft Kit For 9N, 2N, 8N With STD Rod And Main Bearings (Part No: 9N6303ACK) 478.14 [Enlarge Picture] 


(Nseries) Rotating Valve Conversion Kit - Convert regular exhaust valves to the rotating type. For 9N, 2N, 8N - Kit contains (8) A0NN6500A adjustable tappets, (4) 8N6534B valve rotator kits, (4) 8N6505C exhaust valves, (8) EAM6518A valve locks. Does not include tappet wrenches. (Part No: 8N6546B) 156.37 [Enlarge Picture] 

(Massey) Crankshaft - For TO30, TO35, Continental Z129, Z134 Gas. Replaces OEM part# 1750169M1. Bearings not included. (Part No: 60113S) 507.00 

(Massey) Crankshaft - For TEA20, FE35 80, 85, 87mm. Replaces OEM part# 825216M1. Does not include bearings. (Part No: 42688S) 618.74 

(Nseries) Engine Valve Overhaul Kit - For servicing one engine when valve replacement is necessary. For 9N, 2N, 8N with solid guides, free-rotating exhaust valves. Kit contains intake valves, exhaust valves, valve springs and keys, solid type valve guides. (Part No: VOKF928NFR) 116.00 

(Nseries) Engine Valve Servicing Kit - For servicing one engine with valve related parts when only valve refacing is required. For 9N, 2N, 8N with solid guides, free rotating exhaust valves. Kit contains valve springs, keys and guides. (Part No: VSKF928NFR) 67.00 


(Nseries) Governor - Complete governor assembly, 3 arm, for 9N and 2N (1939-47), without proofmeter drive. (Part No: 9N18200C) 231.34 [Enlarge Picture] 

(Nseries) Governor - Complete covernor assembly, 2 arm, for 8N (1948 through 1952 with proofmeter drive). (Part No: 8N18204B) 239.90 


(Nseries) Basic Governor Repair Kit - For 9N, 2N, 8N. Kit contains gasket, lower race assembly, ball bearing, C-clip, 3 shims and 4 governor balls (5-8 inch). (Part No: BOK12502) 46.20 [Enlarge Picture] 


(Nseries) Complete Governor Repair Kit - For 9N, 2N and 8N. Kit contains lower race assembly, shaft assembly (with or w-o proofmeter), upper face assembly, ball bearing assembly, shi, drive shaft ball stop, governor balls (5-8 inch), bushings, mounting gasket, dust seal, C-clip. (Part No: CAPN12502A) 85.15 [Enlarge Picture] 

(Massey) Cylinder Sleeve for Perkins - Sleeve, cast, replaces 734175M1. For Perkins engines AG3-152 gas and diesel engines:, A3-152 eng. s-n 1935854 & up, AD3-152, and AD4-203 eng. s-n 2939036 & up.-----Tractors: 65, 135, 165, 150, M230, MF235 w- engine s-n ending with D or DL; MF245; Industrials: 35 Utility, 20, 20C, 30, 30B 40, 40B, 50, 200 Crawler, 200B Crawler, 203, 205, 302, 304, 356 Tractor Shovel, 2135, 3165, 2200 Treever, 2244 Crawler, 2200 Forklift, 2500 Forklift, 4500 Forklift, 300 Combine.MF250 with engine s-n prefix CE31089U or CE22488U only. (Part No: 739043M1) 30.00 

(Massey) A3-152 Cylinder Head Assembly - Cylinder head assembly for Perkins A3-152 regular injection diesel engine (injectors vertical in cylinder head). Head assembly includes valves and valve parts. Tractors: 35, 50; Industrials: 35 Utility, 203, 205. Replaces ZZ080058, 743272M91. (Part No: 3638321M91) 545.00 

(Massey) AD3-152 Cylinder Head Assembly - Cylinder head assembly for Perkins AD3-152 direct injection diesel engine (injectors at angle in cylinder head). Head assembly includes valves and valve parts. Tractors: 135, 150, M230, MF235, MF245; Industrials: 20, 20C, 30B, 30D, 40, 203, 205, 2135, 2200 Treever; Forklifts: 2200, 2500, 4500; Crawler tractors: 200, 200B, 200C, 2244. Replaces cylinder heads 737704M91, 740595M91, 743201M91, these heads have valves with a 45 degree face angle and are no longer supplied by OEM. 3637389M91 is the same as supplied by OEM and has valves with a 35 degree face angle. Replaces ZZ080082, ZZ080025, 747574M91. (Part No: 3637389M91) 599.00 

(Massey) Crankshaft Gear - Crankshaft gear, 24 teeth: TE20, TO20, TO30. Continental gas engine. (Part No: 1750284M1) 34.00 

(Massey) Crankshaft Gear - Crankshaft gear, 24 teeth: TO35, 35, MH50, 50, 135, 150. Continental gas engine. (Part No: 1750054M1) 33.00 

(Massey) Camshaft Gear - Camshaft gear, 48 teeth, Continental gas engine in models: TE20, TO20, TO30, TO35, F40, MH50, 50, 135, 150; Industrials: 202, 204, 2135. (Part No: 1750237M1) 48.68 

(Massey) Camshaft - Camshaft w- nut. For Continental Z145 gasoline engine. Used in tractors: 135, 150, M230, MF235, MF245; Industrials: 20C, 30B; forklift: 2500, 4500. (Part No: 1027656M1) 156.18 

(Massey) Camshaft - Camshaft for Continental G176 gasoline engine. Used in tractors: 65, 165; Industrials: 356, 3135, 3165. (Part No: 1753789M91) 216.00 

(Massey) Camshaft - Camshaft for Perkins diesel engines. For AT3-152 in tractor MF253. For T3-152.4 in tractors: MF360, MF364S; industrial: 40E. Replaces Perkins 31415264. (Part No: 3637539M1) 119.00 

(Massey) Camshaft - Camshaft for Perkins diesel engines. For A4-236 in tractors: MF174-4S to eng. s-n U08336N, 175 eng. s-n 236-UA19817 & up, 180 eng. s-n 236-UA19817 & up, MF184-4, MF255, MF265, MF270, MF274-4, MF670; Industrials: 31, 50D, 50E. For A4-248 in tractors: MF194-4, MF275, MF290, MF690; Industrial 50C. Replaces Perkins 31415321. (Part No: 736818M1) 135.00 

(Massey) Camshaft - Camshaft for Perkins diesel engines. For A4-236 in tractors: MF174-4S eng. s-n U08337N & up, MF375 eng.s-n U106655N & up. For A4-248 in tractors: MF383, MF390. Replaces Perkins 31415374. (Part No: 3637537M1) 150.00 


(Massey) Oil Pump - Oil pump assembly for Perkins engines in tractors: 35, 50, 135, M230, MF235, MF245, others using AG3-152 gas and A3-152 & AD3-152 diesel engines. Replaces 41314178, 736513M91. (Part No: 3638632M91) 65.63 [Enlarge Picture] 


(Massey) Oil Pump - Oil pump assembly for Perkins A4-203 & AD4-203 gas & diesel engines. Tractors: 65, 165, MF255; industrials: 30, 40B, 50, 302, 304, 3165; 300S.P. Replaces 41314164, 736617M91. (Part No: 3638633M91) 98.80 [Enlarge Picture] 

(Massey) Oil Pump Repair Kit - Oil pump repair kit, complete, for: TE20, TO20, TO30, TO35, 35, 50, 135, 150, with Continental gas engine. Drive gear is 2-15-16 O.D. Replaces 835643M91. (Part No: OPK60A) 40.43 

(Massey) Governor Assembly - For the following tractors: TO30, TO35, 35, F40, MH50, 50, 135, 150, 11 Pony: industrials: 202, 204, 2135, 2200, 2500 models with Continental engines. Also services as a unit, models with Perkins gas engine: 135 & 150 w Perkins gas. BEARING TYPE.Supersedes & replaces 1002849M91. (Part No: 529737M91) 55.00 


(Nseries) Crankshaft Pulley - Crankshaft pulley for Ford 9N, 2N, 8N tractors. Has four 1-4 -20 threaded holes for hub when being used with front mounted loader. (Part No: 192160) 46.00 [Enlarge Picture] 

(Ford) Crankshaft Pulley - Crankshaft pulley for Ford 9N, 2N, 8N tractors. Supplied with four rubber bushings for hub with 11-32 pins when being used with front mounted loader. (Part No: 192152) 46.00 


(Nseries) Crankshaft Gear - For 9N, 2N, 8N. (Part No: 48-6306A) 32.50 [Enlarge Picture] 


(Nseries) Camshaft Gear - Standard silent fibre gear, 9N, 2N, 8N thru 1952. Bolt-on type. (Part No: 7RA6256) 43.20 [Enlarge Picture] 

(Nseries) Oil Pump Repair Kit - Complete oil pump repair kit for Ford 8N serial# 247571 & up (1948-1952). For pumps with 3-4 gear width. Early & late pumps are interchangeable so measure small gear width before ordering. (Part No: APN6600B/OPK20) 35.50 

(Nseries) Governor Centrifugal Assembly - Governor internal centrifugal assembly, fits 9N18200C or 8N18204B above, for 9N, 2N, 8N (1939 thru 1952). (Part No: 9N8N18179CA) 122.00 

(Nseries) Governor Housing - Governor Housing includes needle bearing, Lip-type seal, bushing, and proofmeter drive cap with seal and nut. For 9N, 2N, 8N tractors built 1939 thru 1952. (Part No: 8N18085) 96.00 

(Farmall/IHC) Governor - Models M, Super M, W6, etc - This is a Rock-It Series Thompson X-Tra Power Governor. Save time and increase performance as much as 20% with this new replacement governor. Precision fully hardened weights are pinless, reducing friction and giving a quicker response. New design weight carrier accomodates 4 pinless weights. Improved rockshaft bearing. Uniball linkage gives posibive control to carburetor. Instant response - no surging- no sticking. For Models M, Super M, W6, 400 and 450. (Part No: 0972RTP) 499.00 

(Farmall/IHC) Governor - Models H, Super H, W4, etc - This is a Rock-It Series Thompson X-Tra Power Governor. Save time and increase performance as much as 20% with this new replacement governor. Precision fully hardened weights are pinless, reducing friction and giving a quicker response. New design weight carrier accomodates 4 pinless weights. Improved rockshaft bearing. Uniball linkage gives posibive control to carburetor. Instant response - no surging- no sticking. For Models H, Super H, W-4, 300 and 350. (Part No: 0973RTP) 499.00 

(Farmall/IHC) Governor - Models 460, 560, 660 etc. - This is a Rock-It Series Thompson X-Tra Power Governor. Save time and increase performance as much as 20% with this new replacement governor. Precision fully hardened weights are pinless, reducing friction and giving a quicker response. New design weight carrier accomodates 4 pinless weights. Improved rockshaft bearing. Uniball linkage gives posibive control to carburetor. Instant response - no surging- no sticking. For Models 460, 560, 660, 606, 706, 806, 856, 756, 856, 2606, 2706, 2806, 544, 54 Series Utility, 74 Series Utility. (Part No: 0974RTP) 450.00 

(Massey) 4-Hole Pulley - For MF 35, MF 50, 202, 204 with Continental Engine. Replaces OEM# 1750076M1 (Part No: 44982S) 41.50 

(Allis Chalmers) Cylinder Head Valve Overhaul Kit - Contains intake & exhaust valves, springs, guides and retainers. For Models B, C, CA (4-cyl gas 125 CID engines), D10, D12, D14, D15 (4-cyl gas 138 & 149 CID engines) and D15 Series II (4-cyl gas 160 CID engine). (Part No: VOKA125) 70.38 

(Allis Chalmers) Cylinder Head Valve Overhaul Kit - Contains intake & exhaust valves, springs, guides and retainers. For Models W, WC, WF, W25, WD (with 4-cyl 201 CID gas engines) and WD45 (with 4-cyl 226 CID gas engine). (Part No: VOKA201) 78.35 

(Allis Chalmers) Cylinder Head Valve Overhaul Kit - Contains intake & exhaust valves, springs, guides and retainers. For D17 with 4-cyl gas 226 CID engine. (Part No: VOKA226) 89.15 

(Allis Chalmers) Cylinder Head Valve Overhaul Kit - Contains intake & exhaust valves, springs, guides and retainers. For D15 to engine serial number 119504 with 4-cylinder diesel 175 CID engine. (Part No: VOKA175) 228.00 

(Allis Chalmers) Cylinder Head Valve Overhaul Kit - Contains intake & exhaust valves, springs, guides and retainers. For Model D17 with engine serial number 113009 to 119937. Not for engine serial number 117087 to 117104. For 6-cylinder diesel engine 262 CID. (Part No: VOKA262) 342.90 

(Nseries) Rod Bearing Set - Complete set for 9N, 2N, 8N. Quality Clevite bearings made in USA. Available in: Standard, .001, .002, .010, .020, .030, .040 . Specify size when ordering. (Part No: 9N6211) 35.78 

(Nseries) Pistons and Sleeves - Pistons and Sleeves are located in the Pistons and Sleeves category Use your BACK key and select this category. (Part No: Various) 100.00 

(Ford) Cylinder Head with Valves - For three cyl. 144 & 152 cu.in. Perkins engines used in Dexta and Super Dexta tractors from 1957 thru 1967. Contains 3 intake and 3 exhaust valves, 6 inner & 6 outer valve springs, 6 valve spring retainers, 6 pairs of valve keys and 6 guides. (Part No: E2046T9) 497.60 

(Case) crankshaft - For 4 cylinder 4TA-390, 4T-390, 4-390 diesel engines for Case-IH tractors: 5120, 5220; windrowers: 8820, 8830, 8840; loader backhoes: 580K, 580 supers. New crankshaft less gear, less bearings. Order bearings separately. (Part No: J918323) 951.24 

(John Deere) Starter Flywheel Ring Gear - For Diesel Tractors: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 5200, 5300, 5400, 5500, 6200, 6300, 6400, 6500. For Diesel Engines: 4219, 6329, 6359 in combines: 3300, 4400, 4420, 4425, 4435, 6600. For Diesel Engines in Windrowers: 2250 w- 4219, 2270 w- 4219, 2280, 2420, 2360 3430, 3830. Replaces T20088. (Part No: PT-R114282) 37.39 

(John Deere) Piston Ring Set - For M gas, 40 gas, 320 gas, 330 gas, 2 Cyl, 100 CID 4 bore. Piston ring set complete one set used per engine. (Part No: PRS1276) 49.55 

(Oliver) Camshaft - Camshaft-3cylinder, Less Gear. For 1250A, 1255, 1265, 1270, 2-50 (Part No: 676843A) 102.7 


(Nseries) Timing Gear, Crankshaft - For 2N, 8N, 9N. Timing Gear Crankshaft. (Part No: 486306A) 30.58 [Enlarge Picture] 


(Nseries) Cylinder Head - For 2N, 8N, 9N all GAS 1939-52. Cylinder Head (Part No: 8N6050A) 143.28 [Enlarge Picture] 

(Massey) Crankshaft Kit - For 235 with Perkins<152UA381043DL 3.152 Diesel Engine SN Ending with DS, (203, 205, 2135, all with Perkins A3.152 or AD3.152 Diesel Engine SN Ending with DS), (135, 150, 20, 2244, 35, 40, 50, all with Perkins A3.152 or AD3.152 Engine SN<152UA381043DL). Crankshaft Kit includes Standard Rod & Main Bearings and Thrust Washers. Uses 2 Piece Rope Seal. Replaces 084402, 736532M1. (Part No: 3637454M1) 377.26 

(Massey) Camshaft - For TE20, TO20, 135, 202, 204, 2135, 2200, 30, 35, 50. Camshaft for Z120, Z129 or Z134 Continental Engines. (Part No: 836543M1) 127.73 

(Massey) Cylinder Head - For 135, 150, 20 Ind, 2135, 230, 235, 40 Ind, all with Perkins AD3.152 Diesel Engine. Cylinder Head. Includes Valves, Guides and Springs, assembled. Replaces ZZ080082, 743201M1. (Part No: 3637389M1) 546.75 

(Massey) Cylinder Head - For 175, 180, 20, 255, 265, 275, 31, 40 all with Perkins A4.236 & A4.248 Diesel Engines. Cylinder Head includes Valves, Guides and Springs, assembled. Replaces ZZ080054, 743112M1. (Part No: 3637486M1) 660.11 

(Massey) Cylinder Head - For 203, 205, 35, 50, all with Perkins A3.152 Diesel Engine. Cylinder Head includes Valves, Guides and Springs, Assembled. (Part No: 3637784M1) 484.65 

(Farmall/IHC) Governor Control Sector - Governor control sector with pivot pin for tractors:H & HV, SUPER H & SUPER HV, M & MV, SUPER M & SUPER MV. (Part No: 51351DBXA) 56.59 

(Ford) Crankshaft - For 601, 701, 801, 901, 2000, 4000 (Except Majors) 58-64, all with Diesel 4 cylinder engines. Crankshaft, New, Not Reground. (Part No: E2JL6300BA) 538.65 

(Massey) Crankshaft - For TO20, TE20, both with Continental Z120 Gas Engine. (S.42843) (Part No: 1750280M1) 435.50 

(Massey) Crankshaft - For 135, 150, 230, 235, 245, Industrial 20C, 30B, 2500, 4500FL with Z145 engine. Crankshaft. (S.60166) (Part No: 1047539M1) 701.35 

(Massey) Crankshaft - For 65, 165, 3165. Crankshaft for G176 engine. (S.61183) (Part No: 830756M91) 773.50 

(Massey) Camshaft - For 65, 175. Camshaft (Part No: 1753789M1) 155.90 

(Massey) Cylinder Head - For 35, 50, 203, 205 (Prior to SN 1846220). Cylinder Head - Indirect Injection. Complete with Valves and Springs. Perkins A3.152. Replaces 743272M91, ZZ080058. (S.40303) (Part No: 3637784M91) 342.00 

(Ford) Camshaft - For 3 cylinder diesel engines in tractors: 2000, 3000, 4000 (1965 to 1975); 3 cyl gas or diesel engine in tractors: 2600, 3600, 4100, 4600, 231, 233, 335, 420, 515, 531, 532, 535, 1975 to 1981) (Part No: C7NN6250E) 155.55 

(Ford) Camshaft - For 4-cyl gas or diesel engine in tractors 5000 (1965 to 1975); 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981); 5610, 5900, 6610, 6710, 7710, (1981 to 1991);industrials 650, 6500, 750, 755, 755A, 7500, (1972 to 7-1987);755B, (8-1987 to -);655, 655A, (6-1985 to 10-1988). Replaces C7NN6250B, E1TN6250AA, E6NN6250AA. (Part No: 87800353) 153.17 

(Oliver) Crankshaft - 3 cylinder (6 bolt) for models 1250A, 1255, 1265, 1270 (Part No: 676787AS) 480.93 

(Oliver) Crankshaft - 3 cylinder (6 bolt) for models: 1250A, 1255, 1265, 1270 (Part No: 31-2900182) 480.94 

(Oliver) Crankshaft - 4 cylinder (7 bolt) for models: 1365, 1370, 2-60, 700. If replacing 6 Bolt Crank, Flywheel will need to be replaced. (S.61964) (Part No: 31-2903327) 377.00 

(Oliver) Flywheel w Ring Gear - 6 Bolt Holes = 10mm x 1.25 12 5-16 ctr to ctr 12 Bolt Holes = 8mm x 1.25 12 ctr to ctr For models: 1355, 1365, 1370, 2-50, 2-60 (Part No: 30-3010171) 206.70 

(Oliver) Flywheel w Ring Gear - 6 Bolt Holes = 10mm x 1.25 12 5-16 ctr to ctr 12 Bolt Holes = 8mm x 1.25 12 ctr to ctr For models: 1355, 1365, 1370, 2-50, 2-60 (Part No: 31-3041220) 206.70 

(Oliver) Ring Gear - For models: 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 2-50, 2-60, 700 (Part No: 676786A) 48.75 

(Oliver) Balancer Assembly - For models: 1355, 1365, 1370, 2-60, 700 (Part No: 61949S) 487.50 

(Oliver) Crankshaft - with Bearings for model: 1850 S-N 150421 > (Part No: 165980AS) 1033.50 

(Case) Crankshaft - Std (Bearings and Thrust Washers NOT included) Use Sets K928540, K207436 & K928542-43. For Models: Selectamatic 990, 990 (Part No: K962224) 877.50 

(Case) Crankshaft - Std (Bearings and Thrust Washers NOT included) Use Sets K928541, K207436 & K928542-43. For Models: 995, 996, 1200, 1210, 1212, (1290 with continuos clutch 11052410>) (1290 with independent clutch 11052360>), 1294, (1390 11120001>)1394. Case Industrial - 580G Engine - AD4-55 (Part No: K210100) 650.00 

(Case) Crankshaft - 3 Cylinder diesel Stroke: 4.5 Main Journal Dia: 2.480 Rod Journal Dia: 2.362 (Bearings and Thrust Washers NOT included) Use Sets K928540, K207436 & K928542-43. For Models:880, 885 (Part No: K961726) 286.00 

(Ford) Camshaft - Gas or Diesel Fits All 3 Cylinder, 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610 (Part No: E8NN6250AA) 101.39 


(Massey) Crankshaft Sprocket - 21 Tooth Fits TEA20, TED20, FE35 with 80, 85 or 87mm Standard Motors Gas (S.42419) (Part No: 825136M1) 47.25 [Enlarge Picture] 


(Massey) Timing chain - 58 Links. Fits TEA20, TED20, FE35 with 80, 85 or 87mm Standard Motors Gas Engine. (60909S) (Part No: 825199M1) 39.90 [Enlarge Picture] 


(Massey) Crankshaft - Fits TEA20, TED20, FE35 with 80, 85 or 87mm Standard Motors Diesel Engine. (42688S) (Part No: 825216M1) 643.75 [Enlarge Picture] 

(Massey) Perkins Crankshaft - Crankshaft Less Bearings, Cylinder Rope Seal A3.152, AD3.152 engines. Fits 50, 35, 30, 135, 235, Ind 20, 40, 202 Workbull, 2135, 2200. (S.61955) (Part No: 736532M91) 295.50 

(Massey) Perkins Crankshaft - Less Bearings, 3 Cylinder. Lip Seal-AD3.152 and G3.152 engines. Fits 135, 230, 231, 240, 245, 250, 253, 360, 20, 20C, 40, 2135, 2200. (S.61956) (Part No: 742827M91) 295.50 

(Farmall/IHC) Valve, Intake - Set of 4 for Models:Cub, Cub Lo-Boy, Eng S-N 261717 & Below Using Connecting Rod # 251246R13. (Flat Head Piston) (Rod Bearing Length .761 )(For Sleeveless Engines) Springs, Guides & Keys Available at additional cost. (Part No: 251260R1) 29.90 

(Farmall/IHC) Valve, Exhaust - Set of 4 for Models:Cub, Cub Lo-Boy, Eng S-N 261717 & Below Using Connecting Rod # 251246R13. (Flat Head Piston) (Rod Bearing Length .761 )(For Sleeveless Engines) Springs, Guides & Keys Available at additional cost. (Part No: 251261R2) 30.45 

(Farmall/IHC) Valve Springs - Set of 8 w-o rotocaps. for Models:Cub, Cub Lo-Boy, Eng S-N 261717 & Below Using Connecting Rod # 251246R13. (Flat Head Piston) (Rod Bearing Length .761 )(For Sleeveless Engines) (Part No: 251262R2) 19.44 

(Farmall/IHC) Intake Valve Set - Set of 4 intake valves for Models: A, AV, B, BN, Super A, Super AV, To S-N 255417. (Cylinder Sleeve 3-5-16 O.D. at Seal)(Valve Length 4-25-32) (Part No: 42024D) 26.14 

(Farmall/IHC) Exhaust Valve Set - Set of 4 exhaust valves for Models: A, AV, B, BN, Super A, Super AV, To S-N 255417. (Flat head compression piston)(Cylinder Sleeve 3-5-16 O.D. at Seal)(Valve Length 4-25-32) (Part No: 42025DA) 35.64 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves for Models: A, AV, Super A & Super AV S-N 255418 To S-N 310299, and C. (Flat head compression piston)(Cylinder Sleeve 3-5-16 O.D. at Seal)(Valve Length 4-57-64) (Part No: 57797D) 19.88 

(Farmall/IHC) Exhaust Valve Set - Set of 4 exhaust valves for Models: A, AV, Super A & Super AV S-N 255418 To S-N 310299, and C. (Flat head compression piston)(Cylinder Sleeve 3-5-16 O.D. at Seal)(Valve Length 4-57-64) (Part No: 57798D) 27.74 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves for Models: 130, 140, 230, 240, 330, 340. (Valve Length 5-15-64) (Part No: 366302R2) 20.04 

(Allis Chalmers) Intake Valve Set - For AC B, 1B, C, CA, B15, B125, D10, D12, D14, D15, (4-Cyl Gas). Intake Valve set of 4. To order valve retainers use part # 70206880. (Part No: 70234829) 25 

(Allis Chalmers) Exhaust Valve Set - For AC B, 1B, C, CA, B15, B125, D10, D12, D14, D15 (4-Cyl Gas). Exhaust Valve set of 4. To order valve retainers use part # 70206880. (Part No: 70228589) 29.95 

(Farmall/IHC) Exhaust Valve Set - Set of 4 Exhaust Valves for Models: 130, 140, 230, 240, 330, 340. (Valve Length 5-15-64) (Part No: 366303R4) 29.87 

(Allis Chalmers) Intake Valve Set - For W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 with 226 CID 4 cylinder Gas engine. Intake valve set of 4 valves. (Part No: 70209132) 24.95 

(Allis Chalmers) Exhaust Valve Set - For W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 with 226 CID 4 cylinder Gas engine. Exhaust valve set of 4 valves (Part No: 70241527) 29.95 

(Allis Chalmers) Intake Valve Set - For D17 with 226 CID 4 cylinder gas engine. Intake valve set (4) (Part No: 70241535) 29.95 

(Allis Chalmers) Exhaust Valve Set - For D17 with 226 CID 4 cylinder gas engine. Exhaust valve set (4). (Part No: 70241527) 29.95 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves For tractors with flat head pistons. Models: H & HV, O4, OS4, W4, Super H, Super HV, Super W4 (Part No: 57696D) 31.59 

(Farmall/IHC) Exhaust Valve Set - Set of 4 Exhaust Valves For tractors with flat head pistons. Models: H & HV, O4, OS4, W4, Super H, Super HV, Super W4 (Part No: 57697D) 38.94 

(Allis Chalmers) Intake Valve Set - For D17 to engine s-n 119504 with 262 CID 6 cylinder Diesel Engine. For D17 engine s-n 113009-119937 not including s-n's 117087-117104. Intake Valve Set (6). (Part No: 74506505) 209.54 

(Allis Chalmers) Exhaust Valve Set - For D15 to engine s-n 119504 with 175 CID 4 cylinder Diesel Engine. Exhaust Valve Set (4). (Part No: 74505210) 59.95 

(Allis Chalmers) Exhaust Valve Set - For D17 to engine s-n 119504 with 262 CID 6 cylinder Diesel Engine. For D17 engine s-n 113009-119937 not including s-n's 117087-117104. Exhaust Valve Set (6). (Part No: 74505210) 89.95 

(Allis Chalmers) Intake Valve Set - For 160 with AD3.152 Perkins 3 Cylinder Diesel Engine. Intake Valve Set (3). (Part No: 72080046) 14.95 

(Allis Chalmers) Exhaust Valve Set - For 160 with AD3.152 Perkins 3 Cylinder Diesel Engine. Exhaust Valve Set (3). (Part No: 72080047) 14.95 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves, length 5-5-16”. For Models: H, HV, O4, OS4, W4, Super H, Super HV, Super W4. (Part No: 50706DA) 25.49 

(Farmall/IHC) Exhaust Valve Set - Set of 4 Exhaust Valves, length 5-5-16”. For Models: H, HV, O4, OS4, W4, Super H, Super HV, Super W4. (Part No: 50707DA) 27.93 

(Farmall/IHC) Intake Valve Kit - Set of 4 Intake Valves for tractors with flat head standard compression pistons-valve length 5-15-32”. Models: H, HV, 300, 350 (Part No: 362534R1) 24.14 

(Farmall/IHC) Exhaust Valve Kit - Set of 4 Exhaust Valves for tractors with flat head standard compression pistons-valve length 5-15-32”. Models: H, HV, 300, 350 (Part No: 362535R1) 71.93 

(Allis Chalmers) Intake Valve Set - For 180, 185, 190, all with 2800 Series Engine. For 190XT, 200, 7000 with 2900 Series Diesel Engine. For 7010, 7020, 8010, all with 649I-649T Series engine. All with 301 CID 6 cylinder. Intake Valve Set (6). (Part No: 74023378) 94.68 

(Allis Chalmers) Exhaust Valve Set - For 180, 185, 190, all with 2800 Series Engine. For 190XT, 200, 7000 with 2900 Series Diesel Engine. For 7010, 7020, 8010, all with 649I-649T Series engine. All with 301 CID 6 cylinder. Exhaust Valve Set (6). 30 Degree face angle. Replaces 4023379 older 45 degree valves. Requires replacement of seats. (Part No: 74009936) 109.35 

(Farmall/IHC) Intake Valve Set - Set of 6 Intake Valves For Model 460(221 CID Gas 6-cylinder engine)and Models 560 & 660 (C263 CID Gas 6-cylinder engine). (Part No: 234275R1) 44.65 

(Farmall/IHC) Exhaust Valve Set - Set of 6 Exhaust Valves For Model 460(221 CID Gas 6-cylinder engine)and Models 560 & 660 (C263 CID Gas 6-cylinder engine). (Part No: 367191R2) 51.15 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves (Part No: 57698D) 25.90 

(Farmall/IHC) Exhaust Valve Set - Set of 4 Exhaust Valves (Part No: 57699D) 62.80 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves (C248 CID Gas 4-cylinder engine). Model M & MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons.)Models Super M & MTA, Super W6 & W6-TA. (Part No: 50731DA) 22.05 

(Farmall/IHC) Exhaust Valve Set - Set of 4 Exhaust Valves (C248 CID Gas 4-cylinder engine). Model M & MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons.)Models Super M & MTA, Super W6 & W6-TA. (Part No: 50732DA) 35.05 

(Farmall/IHC) Intake Valve Set - Set of 6 Intake Valves For Models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons.)and Models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 & 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. (Part No: 234276R1) 45.65 

(Farmall/IHC) Exhaust Valve Set - Set of 6 Exhaust Valves(Stellite Faced) Models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons.)and Models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 & 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. (Part No: 372699R3) 105.55 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves For Models 400 & W400, 450, W450. Check Engine type (Part No: 362435R1) 26.20 

(Farmall/IHC) Exhaust Valve Set - Set of 4 Exhaust Valves For Models 400 & W400. Check engine type. (Part No: 362436R1) 82.35 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves For Models B250, B275, B276, 354, 434. (BD144 & BD144A CID Diesel 4-cylinder engine and For Models 238, 364, 384, B414, 424, 434, 444, 2424, 2444. (BD154 CID Diesel 4-cylinder engine. Flat head pistons. (Part No: 3040361R1) 38.35 

(Farmall/IHC) Exhaust Valve Set - Set of 4 Exhaust Valves For Models B250, B275, B276, 354, 434. (BD144 & BD144A CID Diesel 4-cylinder engine and For Models 238, 364, 384, B414, 424, 434, 444, 2424, 2444. (BD154 CID Diesel 4-cylinder engine. Flat head pistons. (Part No: 3043825R1) 53.15 

(Allis Chalmers) Thrust Washer Set - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Engine Thrust Washers Set (1 set per engine). (Part No: TW426) 41.17 

(Farmall/IHC) Intake Valve Set - Set of 3 Intake Valves For Models 454, 464, 484. (BD179 CID Diesel 3-cylinder engine. Cupped head piston.) (Part No: 3055055R2) 40.10 

(Farmall/IHC) Exhaust Valve Set - Set of 4 Exhaust Valves For Models 474, 584, 585. (206 CID Diesel 4-cylinder engine. Cupped head piston.)and Models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston.) (Part No: 3055056R2) 63.20 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves. For Models 504, 2504, 3514 Farmall and International. (D188 CID Diesel 4-cylinder engine. Cupped head piston (Part No: 278301R1) 38.75 

(Farmall/IHC) Exhaust Valve Set - Set of 4 Exhaust Valves. For Models 504, 2504, 3514 Farmall and International. (D188 CID Diesel 4-cylinder engine. Cupped head piston.) (Part No: 278302R1) 46.90 

(Massey) Starter Assembly - For 135, 150, 165, 180, 1100. Replaces Delco 1108324 and TISCO 80651-EX. 12 Volt system using Continental Gas. Remanufactured starter with New Armature shaft and bushings, new field coils, new brush holder and brushes, new wiring and hardware. (Part No: S14386) 200.95 

(Massey) Starter Assembly - For 285, 1080, 1085. Replaces Delco 1113676 and TISCO 89361-EX. 12 Volt system using Perkins Diesel. Remanufactured starter with New Armature shaft and bushings, new field coils, new brush holder and brushes, new wiring and hardware. (Part No: S13720) 389.82 

(Massey) Starter Assembly - For 175, 180. Replaces Delco 1107539, 1107872 and TISCO 9014-EX and 80301-EX. 12 Volt system with diesel engines. Remanufactured starter with New Armature shaft and bushings, new field coils, new brush holder and brushes, new wiring and hardware. (Part No: S14196) 312.32 

(Farmall/IHC) Intake Valve Set - Set of 6 Intake Valves For Models 460. (D236 CID Diesel 6-cylinder engine. Cupped head piston and Models 560 Engine S-N 6766 to S-N 40698 and 660 Engine S-N 4370 to S-N 40698. (D282 CID Diesel 6-cylinder engine. Cupped head piston.) (Part No: 278301R1) 58.20 

(Farmall/IHC) Exhaust Valve Set - Set of 6 Exhaust Valves For Models 460. (D236 CID Diesel 6-cylinder engine. Cupped head piston and Models 560 Engine S-N 6766 to S-N 40698 and 660 Engine S-N 4370 to S-N 40698. (D282 CID Diesel 6-cylinder engine. Cupped head piston.) (Part No: 278302R1) 70.35 

(Farmall/IHC) Intake Valve Set - Set of 4 Intake Valves For Models 474, 584, 585. (206 CID Diesel 4-cylinder engine. Cupped head piston.)and Models 544, 664, 674, 684, 2544. (D239 CID Diesel 4-cylinder engine. Cupped head piston.) (Part No: 3055055R2) 53.50 

(Farmall/IHC) Intake Valve Set - Set of 6 Intake Valves Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston.)& Models 786, 826, 886 Chassis S-N 14472 & Up, 2826, 3088 to Eng S-N 121247, 3288 to Eng S-N 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston.) (Part No: 3055055R2) 80.20 

(Farmall/IHC) Intake Valve Set - Set of 6 Intake Valves For Models 606, 2606, 656, 706, 2656, 2706. (D236 CID Diesel 6-cylinder engine. Cupped head piston.)and Models 560, 660 Engine S-N 40699 & Up. (D282 CID Diesel 6-cylinder engine. Cupped head piston.) (Part No: 323774R1) 96.00 

(Farmall/IHC) Exhaust Valve Set - Set of 6 Exhaust Valves For Models 606, 2606, 656, 706, 2656, 2706. (D236 CID Diesel 6-cylinder engine. Cupped head piston.)and Models 560, 660 Engine S-N 40699 & Up. (D282 CID Diesel 6-cylinder engine. Cupped head piston.) (Part No: 612312C1) 80.20 

(Allis Chalmers) Governor - For B to s-n 123994, 1B to s-n 2835, C, CA. Governor Assembly, for magneto ignition.3533R (Part No: 70207583) 149.32 

(Allis Chalmers) Governor - For B s-n 123996 and up, 1B s-n 2836 and up, CA, D10, D12, D14, D15. Governor Assembly; distributor type. (Part No: 70225349) 202.85 

(Case) Engine Heater - For 770, 880, 990, 1200 all with 1 3-4 diameter dish type frost plug heater. With cord, GE405S-S. 600 watts. (Part No: K962704) 38.33 

(Case) Engine Heater - For 770, 880, 990, 1200 all with 1 3-4 diameter dish type frost plug heater with cord, GE31.600 watts. (Part No: K962705) 33.82 

(Farmall/IHC) Exhaust Valve Set - Set of 6 Exhaust Valves Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston.)& Models 786, 826, 886 Chassis S-N 14472 & Up, 2826, 3088 to Eng S-N 121247, 3288 to Eng S-N 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston.) (Part No: 3055056R2) 94.80 

(Farmall/IHC) Intake Valve Set - Set of 6 Intake Valves For Models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston.)& Models 1206, 21206. (D361 CID Turbo Diesel 6-cylinder engine. Cupped head piston.)& Models 856, 2856 Tractors & 815 Combine with D407 & 1026, 1256, 21026, 21256 Tractors with DT 407. (D 407 CID & DT407 CID Turbo Diesel 6-cylinder engine. Cupped head piston. Piston Pin Dia. 1-1-2”) (Part No: 343433R2) 138.15 

(Farmall/IHC) Exhaust Valve Set - Set of 6 Exhaust Valves For Models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston.)& Models 1206, 21206. (D361 CID Turbo Diesel 6-cylinder engine. Cupped head piston.)& Models 856, 2856 Tractors & 815 Combine with D407 & 1026, 1256, 21026, 21256 Tractors with DT 407. (D 407 CID & DT407 CID Turbo Diesel 6-cylinder engine. Cupped head piston. Piston Pin Dia. 1-1-2”) (Part No: 612313C1) 113.00 

(Farmall/IHC) Intake Valve Set - Set of 6 Intake Valves For 966 Tractor & 815 Combine. (DT414 CID Diesel 6-cyl eng. Cupped Head Piston.) & 1066, 1086 Tractors & 915 Combine. (DT414 CID DT414B Turbo Diesel 6-cyl eng. Cupped Head Piston.)& 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 & 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cyl eng. Cupped Head Piston.) (Part No: 675046C2) 76.15 

(Farmall/IHC) Exhaust Valve Set - Set of 6 Exhaust Valves For 966 Tractor & 815 Combine. (DT414 CID Diesel 6-cyl eng. Cupped Head Piston.) & 1066, 1086 Tractors & 915 Combine. (DT414 CID DT414B Turbo Diesel 6-cyl eng. Cupped Head Piston.)& 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 & 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cyl eng. Cupped Head Piston.) (Part No: 676865C2) 96.80 

(Case) Valve Train Kit - For David Brown Models 780 To SN 6039 & 880 Live Drive To SN 25306, 880 Non Live Drive To SN 2984, 885, 1190 and 1194. Kit contains:3 Inlet Valves, 3 Exhaust Valves, 3 Inlet Springs, 3 Exhaust Springs, 12 Collet. (Part No: 57900S) 54.60 

(Case) Valve Train Kit - For David Brown Models Selectamatic 990 SN 15240 & Up, Synchromatic 990, Selectamatic 1200 S-N 11930 & Up, Synchromatic 995, 996, 1210 and 1212. Kit contains:4 Inlet Valves, 4 Exhaust Valves, 4 Inlet Springs, 4 Exhaust Springs, 16 Collet. (Part No: 57901S) 72.83 

(Case) Valve Train Kit - For David Brown Models 1410 and 1412. Kit contains:4 Inlet Valves, 4 Exhaust Valves, 4 Inlet Springs, 4 Exhaust Springs, 16 Collet. (Part No: 57902S) 76.90 

(Case) Valve Train Kit - For David Brown Models 1594, 1694 and 1690 Turbo. Kit contains: 6 Inlet Valves, 6 Exhaust Valves, 6 Inlet Springs, 6 Exhaust Springs, 24 Collet. (Part No: 57904S) 112.00 

(Case) Valve Train Kit - For David Brown Model 1690. Kit contains: 6 Inlet Valves, 6 Exhaust Valves, 6 Inlet Springs, 6 Exhaust Springs, 24 Collet. (Part No: 57903S) 109.30 

(Farmall/IHC) Oil Pump Assembly - For 606, 2606, 560 eng S-N 32243 & up, 656, 660 eng S-N 32243 & up, 706, 2656, 2706, Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756, 806, 826, 856, 2806, 2826, 2856, 3309, 340, 560 eng S-N 42218 & up, 660 eng S-N 42218 & up, 706 eng S-N 51721 & below, 2706 eng S-N 51721 and below. Oil Pump and Screen Assembly for gas and diesel engines replaces 308366R91. (Part No: 379138R91) 149.50 


(Farmall/IHC) Camshaft Gear - For M, Super M, 6, Super W6, 400, W400, 450, W450. Gear for camshaft, for gas powered tractors. (Part No: 6760DB) 130.68 [Enlarge Picture] 

(Massey) Engine Block Heater - For 135, 150, 230, 231, 235, 240, 245, 250, 253, 254-4, 282, 283, 298, 360, 364S, 399, 698. Engine Block Heater for 1 1-4 opening in block. 600 watts, 120 volts. (Part No: 19841A91) 29.95 

(Massey) Starter Ring Gear - For TE20. Starter Ring Gear for 85MM Gasoline Engine, 145 Teeth. (12V only) 42422S (Part No: 825452M1) 51.56 

(Massey) Fuel Heater Plug - For TO35, FE35, 23C Diesel. Fuel Heater Plug. 41322S (Part No: 1021910M91) 31.58 

(Ford) Camshaft, (less snap ring) - For NAA, 600, 700, 800, 900, 2000, 4000 with 134 or 172 Engine. (Part No: 0431R) 149.00 

(Massey) Camshaft (With Nut) - For TE20, TO20, TO30, TO35, 35, 40, 50, 135 with Continental Z120, Z129, Z134 Gas Engines. (Part No: 0145R) 124.20 

(Massey) Camshaft (With Nut) - For 135, 150, 230, 235, 245, 250 with Continental Z145 Engine. (Part No: 0742R) 119.20 

(Oliver) Flywheel and Ring Gear - For White-Oliver with Fiat Engine 1355, 1365, 1370, 2-50, 2-60. Flywheel with Ring Gear. 7 Bolt. Replaces 30-3010171, 31-3041220, 31-2900051, 31-2900052. (Part No: S61980) 239.00 


(Nseries) Valve Overhaul Kit - Fits 9N, 2N& 8N that use solid valve guides and have NON-rotating exhaust valves. Includes Intake & exhaust valves, springs, keys, and guides. (Part No: VOKF928N) 89.00 [Enlarge Picture] 


(Massey) Camshaft Sprocket - (42 Tooth) For TEA20, TED20, FE35. Standard 80mm, 85mm, 87mm Gas. (42418S) (Part No: 825135M1) 47.25 [Enlarge Picture] 


(Nseries) Valve Tappet Set - Set of 8 tappets. Fits: 9N, 2N, 8N with front mount distributor. (Part No: A0NN6500A) 96.70 [Enlarge Picture] 

(Massey) TIMING CHAIN - FOR T035, FE35 STANDARD 23C DIESEL.(62 LINKS) (Part No: 826094M1) 25.58 

(Massey) Camshaft sprocket - FOR TO35, FE35, MF35, TED20 with the Standard Motors 23C DIESEL Engine. (61637S) (Part No: 826089M1) 50.96 


(Massey) TIMING CHAIN - FOR TEF20 with the Standard Motors 20C DIESEL Engine. (86 LINKS) (41616S) (Part No: 61471) 27.60 [Enlarge Picture] 

(Massey) CRANKSHAFT SPROCKET - 20 Tooth. FOR TEF20, TO35, FE35, MF35 with Standard Motors 23C or 20C, DIESEL. (61346S) (Part No: 826041M1) 44.70 

(Massey) GOVERNOR WEIGHT ASSEMBLY - FOR TEA20, TED20, FE35 STANDARD 80MM, 85MM, 87MM, GAS (Part No: 825890M91) 26.85 


(Farmall/IHC) Valve Overhaul Kit - Fits Cub, Cub LO-Boy (4cyl GAS-C60 CID). Kit includes Valves, Valve Springs (For Non-Roto Exhaust Valve), Valve Keys And Valve Guides. (Part No: VOKH60) 106.28 [Enlarge Picture] 

(Farmall/IHC) Valve Overhaul Kit - Fits A, AV, B, BN, Super A, AV to S-N 255417 Valve Length 4-25-32 , (4cyl Gas-C113). Kit includes Valves, Valve Springs(For Non-Roto Exhaust Valve), Valve Keys, And Valve Guides. (Part No: VOKH113) 103.58 

(Farmall/IHC) Valve Overhaul Kit - Fits Super A, AV s-n 255418 to s-n 310299, C and Super AI, AVI s-n 310300 & up, Super C, 100 & 200. Valve Length 4-57-64, (Gas 4 cyl, C113, C123 CID). Kit includes Valves, Valve Springs (for Non-Roto Exhaust Valve), Valve Keys, Valve Guides. (Part No: VOKH123) 85.12 

(Farmall/IHC) Valve Overhaul Kit - Fits 130, 140, 230, 240, 330, 340 valve length(5-15-64), (4cyl gas C123, C135). Kit includes Valves, Valve Springs(For Non-Roto exhaust Valve), Valve Keys & Valve guides. (Part No: VOKH135) 106.28 

(Farmall/IHC) Valve Overhaul kit - Fits H, HV, O4, OS4, W4 (4cyl C152). Kit includes Valves, Valve Springs(For Non- Roto Exhaust Valve), Valve keys, Valve Guides. (Part No: VOKH152A) 112.73 

(Farmall/IHC) Valve Overhaul Kit - Fits H, HV, to s-n 106907, O4, OS4, W4.Kit includes Valves(5-5-16 Length), Valve Springs(For Non-Roto Exhaust Valve), Valve Keys, Valve Guides. (Part No: VOKH152B) 90.68 

(Farmall/IHC) Valve Overhaul kit - Fits H, HV, s-n 106908 & up, Super H, HV, Super, W4, 300, 350, (4 cyl gas C152, C164, C169, C175). Kit includes Valves(5-15-32 Length), Valve Springs (For Non-Roto exhaust valve), Valve Keys, Valve Guides. (Part No: VOKH152C) 134.52 

(Farmall/IHC) Valve Overhaul Kit - Fits Super H, HV, Super W4, (4 cyl C164 cid). Kit Includes Valves, Valve spings, Valve Keys, Valve Guides. (Part No: VOKH164A) 115.54 

(Farmall/IHC) Valve overhaul Kit - Fits Super H, HV, Super W4(4cyl gas valve length 5-5-16).Kit includes Valves, Valve springs, Valve Keys, Valve Guides. (Part No: VOKH164B) 93.49 

(Farmall/IHC) Valve Overhaul Kit - Fits 460, 606, 2606, 560, 660 (6 cyl gas C221, C263 CID). Kit includes Valves (Intake valve length DIA 1-21-32), Valve springs, valve keys, valve guides. (Part No: VOKH221) 152.41 

(Farmall/IHC) Valve Overhaul Kit - Fits 460, 606, 2606, 560, 660 (gas 6cyl C221, C263). Kit includes valves( Intake valve head DIA 1-21-32), Stellite Exhaust valve, valve springs, valve keys, valve guides. (Part No: VOKH221S) 204.82 

(Farmall/IHC) Valve Overhaul kit - Fits M, MV, O6, OS6, W6 For DISTILLATE. Kit includes Valve, Valve Springs, Valve Keys, Valve guides. (Part No: VOKH248) 138.95 

(Farmall/IHC) Valve Overhaul Kit - Fits M, MV, O6, OS6, W6, SUPER M, MTA, SUPER W6, W6-TA (Gas 4cyl C248, C264). Kit includes Valves, Valve Springs, Valve keys, Valve guides. (Part No: VOKH264) 98.43 

(Farmall/IHC) Valve Overhaul Kit - Fits 656, 706, 2656, 2706, 666, 686, 756, 766, 2756, Hydro 70, 86, 806, 826, 2806, 2826, 2856 (Gas 6cyl, C263, C291, C301).Kit includes Valves(stellite Exhaust Valve), Valve Springs , Valve Keys, Valve Guides, (Part No: VOKH263S) 211.69 

(Farmall/IHC) Valve Overhaul Kit - Fits 454, 464, 484, (3cyl Diesel D179 CID) Kit includes Valves, Vale Springs, Valve Keys, Valve Guides. (Part No: VOKH179) 153.11 

(Farmall/IHC) Valve Overhaul Kit - Fits 504, 2504, 3514(4cyl Diesel, D206, D239 CID). Kitb includes Valves, Valve Springs, Valve Keys, Valve Guides. (Part No: VOKH188) 146.43 

(Farmall/IHC) Valve Overhaul Kit - Fits 474, 584, 585, 544, 574, 664, 674, 684, 2544( 4cyl Diesel D206, D239 CID).Kit includes Valves, Valve Springs, Valve Keys, Valve Guides. (Part No: VOKH239) 204.72 

(Farmall/IHC) Valve Overhaul Kit - Fits 460 eng s-n 5611-10983, 560 eng s-n 6766-29264, 660 eng s-n 4370-29264, (6 cyl D236, D282 CID). Kit includes Valves, Valve Springs, Valve Keys, Valve Guides. (Part No: VOKH282A) 214.50 

(Farmall/IHC) Valve Overhaul Kit - Fits 460(eng s-n 10984-up), 560, 660(eng s-n 29265-40698), 6cyl Diesel D236, D282. Kit includes Valves, Valve Springs, Valve Keys, Valve Guides. (Part No: VOKH282B) 219.64 

(Farmall/IHC) Valve Overhaul Kit - Fits 606, 2606, 560, 660 eng s-n 40699-up, 656, 706, 2656, 2706, ( 6 cyl Diesel D236, D282). Kit includes Valves, Valve Springs, Valve Keys, Valve Guides. (Part No: VOKH282C) 237.48 

(Farmall/IHC) Valve Overhaul Kit - Fits 686, 706, 756, 2706, 2756, Hydro 86, 786, 826, 886(chassis s-n 14472-up), 2826, 3088, 3288. Kit includes Valves, Valve Springs, Valve Keys, Valve guides. (Part No: VOKH358) 306.22 

(Farmall/IHC) Valve Overhaul Kit - Fits 806, 2806, 1206, 21206, 856, 2856, combine 815, 1026, 1256, 1456, 21206, 21256, 21456, combine 915, (6cyl Diesel turbo & Non-Turbo, D361, DT361, D407, DT407). Kit includes Valves, Valve Springs, Valve Keys, Valve Guides. (Part No: VOKH361) 500.91 

(Farmall/IHC) Valve Overhaul Kit - Fits 966, combine 815, 1066, 1086, combine 915, 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388, combine 1460, 1480, 4366, 4386, 3588, 3788, 4386, 5288, 5488, 6588, 6788, 7288, 7488, combine1470, 1480 (6cyl Diesel Turbo & Non-Turbo, D414, DT414, DT414B, DT436, DT436B, DT466, DT1466, DT466B, DT1466B, DT466C, DT1466C). Kit includes Valves, Valve Springs, Valve Keys, Valve Guides. (Part No: VOKH414) 243.43 

(Massey) Crankshaft Seal Kit - Kit contains front & rear crank seals, felt seal & gasket for rear seal retainer. For continental gas engines: Z120, Z129, Z134, Z145. Tractor Models: TO20, TE20, TO30, TO35, F40, MF50, MF35, MF135, MF150, 202, 204 (Part No: VPC5122) 23.95 

(Massey) Camshaft - Replaces 31415261. For Models: 135, 150, 154-4, 1545, 20, 20C, 20D, 20F, 200, 203, 205, 2135, 2200, 2244, 230, 231, 235, 240, 2400, 245, 250, 2500, 253, 254-4, 30B, 30D, 30E, 30H, 35, 350, 360, 40, 40E, 4830FC, 50, 5500, 5830, 5830FC, 5860, 5870, 6030C, 7830, 7830C, 8830 (Part No: 733507M1) 55.64 

(Massey) Connecting Rod - For Modeles (365, 65 all E-s-n 2939035 not ending W-DL), (165, 255, 30, 300, 302, 3165, 356, 40B, 50, ALL E-S-N 29C1085), 304 E-S-N 2939036-29C1084, (20C, 235, 245, 30B ALL Engine S-N Ending In DS), 250 Eng S-N Ending in DSL, 40 Industrial W-AD3.152&AT3.152 Engines, (135, 148, 20B, 20D, 20E, 20F, 230, 240, 250, 253, 254, 254S, 255, 30E, 30H, 350, 353, 355, 360, 363, 40E, 550 ALL W-AD3.152&AT3.152 ENGINES), (155, 158, 165, 260, 560, 65, 765 ALL W-AD4.203 ENGINE) (Part No: ZZ90010) 67.44 

(Massey) Cylinder Head - For 175, 194-4F, 255, 275, 283, 290, 374S, Early 375, Early 390, 394S, 690, 20C, 50C, 50D, 50H. Cylinder Head - Indirect Injection. Complete with valves and springs. for Perkins A4.212, A4.235, and A4.248 engines. Also replaces 3637486M91, ZZ80054, and ZZ80072. (S.40306) (Part No: 748400M91) 629.20 

(Massey) Oil Pan - For 230, 235, 240, 245, 250, 20, 20C, 20D, 20E, 20F, 30B, 30D, 30E, 30H, 40, 40E, 2500, 4500, all with Lip Type Crank Seal. Also replaces 37172402. (S.42861) (Part No: 741600M1) 259.20 

(John Deere) Crankshaft - For 820 Germany, 830, 1020, 1520, 2040, 2240 - all with 152, 164, or 179 Cubic Inch Engines. 3 CYLINDER - LESS BEARINGS (S.61961) (Part No: S-AT18031) 377.00 

(John Deere) Crankshaft - For 2510, 2020, 2030, 2520, 2440, 2250, 2510, 210C Backhoe, 6000 Hi Cycle, 219, 4239 Power Units. Crankshaft - 4 CYLINDER, LESS BEARINGS. (Part No: S-AT18030) 442.00 

(John Deere) Crankshaft - For 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150. Crankshaft for 6 CYLINDER APPLICATIONS, LESS BEARINGS. (Part No: S-AT22562) 676.00 


(Ford) Cylinder Head - For 2N, 8N, 9N all GAS 1939-52. Cylinder Head (Part No: 8N6050A) 143.28 [Enlarge Picture] 

(Allis Chalmers) Crankshaft Pulley - For D10 S-N under 3501, D12 S-N under 3001, D14. Crankshaft Pulley. (Part No: 70236741) 29.32 

(Allis Chalmers) Flywheel Ring Gear - For D17, 170, 175 all with gas engine, W225 S-N PU96714 and up with gas engine. Flywheel Ring Gear. (Part No: 70226830) 32.35 

(Allis Chalmers) Engine Oil Pump - For DX3.30, DX3.50, DX3.70, DX3.90, 6240, 6250, 6265. Engine Oil Pump. Also replace OEM Part Numbers 4157010, 4158299, 4159964, 4230651, 4231307. (Part No: 2130440) 105.25 

(Allis Chalmers) Engine Oil Pump - For DX110, DX470, DX90, D1106, D1306, D8006, 7085, 7807. Engine Oil Pump. Also replaces OEM part numbers 4157674, 4158341, 4159951, 4230653. (Part No: 2130385) 113.65 

(John Deere) Crankshaft Pulley - For (2040, 2240 both after S-N 350000), 2150, 2155, 2255, 2350, 2355, 2550, 2555, 2750, 2755, 2855. Crankshaft Pulley. (Part No: R80808) 78.35 

(Oliver) Crankshaft - For models 1250 Diesel.Replaces 671492AS. (Part No: 59052S) 643.50 

(Farmall/IHC) Ring Gear,Flywheel - For models A, B, C, SUPER A, SUPER C, 100, ``130, 140, 200, 240.This Gear has 90``teeth, 11.435 OD, .50 wide. (Part No: 55755DB) 25.93 

(Farmall/IHC) Ring Gear Flywheel - For models H, SUPER H, SUPER W4, 300, 330, ``340, 350, 4. This flywheel has 104 teeth, 13.165 OD, 12 ID. (Part No: 45638DB) 26.50 

(Farmall/IHC) Ring Gear Flywheel - For models M, MD, 0DS6, SUPER M, SUPER MD, ``SUPER W6, WD6, W400, W450, W6, 400, 450, 6, ``(560, 660 ALL DSL ONLY). This ring gear``has 125 teeth, 15.72 OD, .80 wide.(AI) (Part No: 266142R1) 37.00 

(John Deere) Crankshaft - For 2555, 2755, 2855 to S-N 927100, 3430 to S-N 300000, 3830 S-N 300000 and up, 210C S-N 216422 and up, 6100, 6500. Crankshaft with Gear, Less Bearings, for 4 cylinder 239 Diesel. Replaces OEM# RE36605, RE44468. (Part No: TP-RE20585) 795.86 

(John Deere) Crankshaft - For 2630, 2640. Crankshaft with Gear, Less bearings. New. For 4 cylinder 276 Diesel. Replaces AR62362 marked R54501. (T) (Part No: TP-RE56792) 1064.79 

(John Deere) Crankshaft - For 6400, 6500. Crankshaft with gear, less bearings. New. For 4 cylinder Diesel Engine. Marked R90825, R120009. (T) (Part No: TP-RE54883) 1127.90 

(John Deere) Crankshaft - For 2840, 2940, 2950, 2955 to S-N 927838, 3150, 3155 to S-N 927838, 4030, 4050 with 6359, 4400, 4420, 4425, 4435, 6600, 9400 with 6359 to S-N 337245, 9900, 9910, 9920, 9930. All with 6 cylinder 329 or 359 Diesel Engine. Crankshaft with gear, less bearings. New. Marked T23266, T23267. (Part No: TP-AT22562) 963.24 

(John Deere) Ring Gear - For 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7200, 7400, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570. Starter Flywheel Ring Gear for DIESELS. (t) (Part No: TP-R28811) 47.63 

(John Deere) Ring Gear - For 6404, 6466, 6359, 6068 (6.8 Liter), 6076 (7.6 Liter), Combines: 6600, 6602, 6620, 6622, 7700, 7702, 8820, 9400, 9500, 9600. Starter Flywheel Ring Gear for DIESELS. (t) (Part No: TP-R28811) 47.63 

(John Deere) Ring Gear - For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 5200, 5300, 5400, 5500, 6200, 6300, 6400, 6500. Starter Flywheel Ring Gear for DIESELS. (t) (Part No: TP-R114282) 47.69 


(Case) Crankshaft Coupling - 5-16 inch bolt holes. Fits: David Brown 1200, 1210, 1212, 1390, 1394, 1410, 1412, 1490, 1494, 1590, 1594, 1690, 1694. (17436S) (Part No: K910538) 69.00 [Enlarge Picture] 


(Case) Crankshaft Coupling - 3-8 inch bolt holes. Fits: David Brown 1200, 1210, 1212, 1390, 1394, 1410, 1412, 1490, 1494, 1590, 1594, 1690, 1694. (17437S) (Part No: K200465) 69.00 [Enlarge Picture] 

(Case) Engine Gear Kit - For 1290, 1294, 1390, 1394, 1410, 1412, 1490, 1494, 1212 with S-N E18286 and up, 1210 with S-N E25713 and up, 995 with S-N E41927 and up, 996 with S-N E56331 and up, 990 Syncromatic with S-N E42772 and up. Kit Contains 1 Of Each Of The Following Gears: K945097 Camshaft Gear, K949822 Injection Pump Gear (3BOLT MOUNT) , K946144 Intermediate Gear, K945094 Crankshaft Gear, K945098 Steering Pump Gear. (Part No: VPA5100) 521.3 

(Farmall/IHC) Ring Gear - For 385, 395, 454, 464, 484, 485, 495, 574, 584, 595, 684, 685, 695, 784. Flywheel Ring Gear. 126 Tooth, 15.93 OD, 14.625 ID, .562 Wide. (Part No: 60883H) 38.75 

(Farmall/IHC) Ring Gear - For 1070, 1090, 1170, 1175, 1270, 1370, 1570, 770, 870, 970. Ring Gear. 139 Tooth. 17.547 OD, 14.88 ID, .88 Wide. (Part No: A58778) 65 

(Oliver) Flywheel Hub - For Jet Star 3, Jet Star 4, Big Mo 400 Industrial Wheeler, 335 Powerlined. Flywheel Hub comes with bushing. (Part No: 10A7188) 181.68 


(Massey) Valve Train Kit - Contains 4 Intake Valves, 4 Exhaust Valves, 8 Inner and Outer Springs. Fits TO35, FE35, TEF20 with the Standard Motors 23C Diesel Engine. (Part No: 41946S) 79.90 [Enlarge Picture] 

(John Deere) Crankshaft - For JD644B, JD646, JD646B, JD700A, JD760, JD760A, JD762, JD860B, 5010, 5020, 5200, 5400, 5460, 5820, 5830, 6030, 644B, 646B, 700, 700A, 744E, 7520, 760, 760A, 762, 770, 772A, 850, 858, 855, 860B, 862, 8630, 8640, 8650, 8760, 890, 890A, 992D & 992E with S-N above 49060, all with 6-619 6 cyl Diesel Engine. Call for truck shipping rate = 240 lbs. (Part No: AR92533) 1959.60 

(John Deere) Cranckshaft with Timing Gear - For JD646, JD740, 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 644D, 646C, 6622, 690B, 690C, 690CR, 693C, 740A, 762A, 762B, 770B, 772B, 790, 792, 8450, 850B, 8560, 8760, 892D, 8960, 9500, 9600, 9960, (4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5400, 5460, 5720, 5730, 6600, 6602, 6620, 7700, 7720, 8430, 8440, 8820, 9940, 9950, all for JD 6-404 - 6-466 Engine). Crankshaft with R26049 Timing gear installed. Call for shipping charges - Weight 149 lbs. (Part No: RE53422) 1281.54 

(John Deere) Crankshaft - For 2155, 2355N, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5310N, 5320, 5320N, 5400, 5400N, 8875, (3029D, 3029T both with Saran Engine SN 100000 and up), (1550, 1750, 1850 all with S-N 927755 and up). Crankshaft replaces Casting # R101223. (Part No: RE50979) 725.53 

(John Deere) Crankshaft - For 3010, 500A, 3020 Diesel to replace crankshaft marked R40570, (JD500, JD500A, JD500B, 510, all Diesel to replace crankshaft marked R40570), 500 with S-N below 123113, (500B, 500C, both with S-N above 280000 with 4.270 4 cylinder engine. Crankshaft. Possible additional shipping charges - weight 120 lbs. (Part No: AR40485) 1207.88 

(John Deere) Crankshaft - For 7400, 7600 both with 6-414D or 6-414T Diesel Engine. Cranshaft replaces Casting #'s R54619 and R104523. (Part No: RE45517) 1348.50 

(John Deere) Crankshaft Dampener Pulley - For 4000, 4020 all S-N above 201000 with A-C. Crankshaft Dampener Pulley. (Part No: AR58176) 197.35 

(John Deere) Crankshaft Pulley - For JD103, 1020, 820, 830. Crankshaft Pulley replaces T24441, T25366. 1.5 I.D., 2.750 Center to Center on Holes. (Part No: R59915) 48.85 

(John Deere) Crankshaft Pulley - For JD400, 1830, 2030, 2130, (2440 and 2640 with S-N above 341000). Crankshaft Pulley replaces T24440, T25365. 1.5 I.D. 6 hole. (Part No: R59312) 54.74 

(John Deere) Crankshaft Timing Gear - For JD500, JD600, JD644, JD646, JD690, JD740, 1177, 1188, 3010, 3020, 4055, 4240S, 4255, 4350, 4455, 4555, 4755, 4955, 500A, 500C, 510, 644, 646, 690, 693, 740A, 743A, 762A, 762B, 770, 772, 790, 792, 850B, 8560, 8760, 892DLC, 8960, 9500, 9600, 985, 9940, 9960, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5440, 5460, 5720, 5730, 6600. Crankshaft Timing Gear with 23 Tooth. (Part No: R26049) 74.30 

(John Deere) Balancer Shaft - Right - For JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Right Hand. (Part No: AR61351) 79.65 

(John Deere) Balancer Shaft - Left - For JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Left Hand. (Part No: AR61352) 79.65 

(John Deere) Camshaft - For JD646, JD690, JD690A, JD740, 1177, 1188, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5200, 5440, 5720, 5730, 5820, 644C, 644D, 6600, 6602, 6620, 6622, 690B, 690C, 690CR, 693B, 693C, 740A, 762, 762A, 770A, 770B, 7700, 772A, 772B, 7720, 790, 790D, 792, 793D, 8430, 8440, 8450, 850B, 8640, 8650, 8820, 892DLC, 985, 9940, 9950. Camshaft replaces AR79610, AR71709, AR74144, AR100384, Casting Numbers R71529, R78316, R77259 (Part No: AR100385) 239.07 

(John Deere) Flywheel with Ring Gear - For 4320, 400 - 500 Engines. Flywheel with #R28811 Ring Gear replaces R46045. (Part No: AR48294) 458.25 

(John Deere) Flywheel with Ring Gear - For JD500, JD500A, JD500B, JD600, 3010, 3020, 4010, 4020, 500C, ALL WITH DIESEL - SYNCRO TRANS., FOR SQUARE PIN HOLE STYLE FLYWHEELS. Flywheel with #R28811 Ring Gear. (Part No: AR40565) 324.87 

(John Deere) Flywheel with Ring Gear - For 2040S, 2140, 2250, 2355, 2450, 2550, 2555, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3350, 3640. Flywheel with Ring Gear replaces AR92508 Marked R80985, R70490, R75432. (Part No: RE18678) 324.88 

(John Deere) Cylinder Head - Cylinder head less valves for models ``M, MT, 40. Replaces M56T, M1768T. Includes Guides and Seats. (Part No: 0352R) 299.60 

(John Deere) Cylinder Head - For 420, 430. Cylinder Head with Guides and Seats. Replaces M3035T and M3995T. (Part No: 0430R)